Pioneer BDR-XD07TB Mode D'emploi page 12

Operations
The unit writes to disc when the supplied software application is installed on your PC. Writing fails if the
PC or operating system does not support the software.
Begin writing to disc
1 Connect the supplied USB cable.
2 Turn on the PC.
3 Press the OPEN button, and gently lift the disc cover by hand.
* If this device is connected to Mac, you will not be able to use this function due to the specifications
of macOS.
4 Place the disc in the tray with the label facing up.
5 Close the disc cover gently.
6 Start the disc burning application.
End the writing session
1 Quit the disc burning application.
2 Press the OPEN button, and gently lift the disc cover by hand.
* If this device is connected to Mac, you will not be able to use this function due to the specifications
of macOS.
3 Remove the disc.
4 Close the disc cover gently.
5 Shut down the PC.
• When the lock mechanism is released, the disc cover needs to be fully opened in order to close again.
12
En