Troubleshooting - skilsaw SPTH14 Consignes De Fonctionnement/Sécurité

Problem
Battery pack will
not charge.
12

Troubleshooting

Cause
1. Charger is not plugged into a
functioning outlet.
2. Battery pack is not completely
inserted into the charger.
3. Bad contacts.
4. Battery is over- or under-
temperature.
5. Battery is detected over-
temperature during charging.
6. Battery pack is damaged.
7. Charger is damaged.
Remedy
1. Confirm charger is plugged into a
functioning outlet.
2. Confirm battery pack is inserted into
charger completely.
3. Unplug the charger from power
outlet. Clean the contacts of the
charger or battery packs.
4. Cool the battery if too hot. Place the
battery indoors if too cold.
5. Detach and then re-attach the
battery pack onto the charger. The
charger will charge the battery when
it cools back under 50°C（122°F）
6. Have the battery pack serviced by
an Authorized SKILSAW Service
Station.
7. Have the charger serviced by an
Authorized
Station.
SKILSAW Service