Canyon GP-W6 Mode D'emploi page 5

Modes and indicators:
1. Default mode is Xinput , LED1+LED2 will light. 2. Hold the "HOME" button for 6
seconds, when changing to D-input mode successfully, LED1 + LED3 will light.
3.You can press the "Home" button once to change to digital mode when it is in
Dinput mode , LED1+LED4 will light. In this mode the direction key and left joystick
swaps function position.
XINPUT
Mobile phone / tablet connection Settings
1. Insert receiver into the OTG cable.
2. Connect the OTG cable to phone/tablet.
3. The controller LED should turn off.
4. Quickly press the HOME button twice, 4 channel LED lights should flash .
5. When channel LED3+LED4 stay on ,connection is successful .
Note:
1. The mobile phone or tablet must support the OTG function and be able to use an OTG
cable connection.
2. The current Android version does not support the controller vibration function.
3. If not in Android mode, you can press the HOME button for 6 seconds to switch mode.
Note:The factory default is xinput mode. Controller with memory function, can save
settings from last time of use.
Troubleshooting
The gamepad does not work
» Check USB connection;
» Try to plug gamepad into a different USB port;
» Restart computer/console.
» Gamepad works well when plugging into a full powered USB port. If you use USB
HUB, it must have its own power supply.
The gamepad detects a disconnection when playing a game
» Check your console system is latest version or not, if you updated your system,
please download our updating software.
Warranty
» This product comes with 24-months limited warranty.
» For more information about usage and warranty, please refer to
www.canyon.eu/support
Manufacturer: Asbisc Enterprises PLC, Cyprus, Limassol 4103. Diamond Court, 43
Kolonakiou Street. Agios Athanasios. http://canyon.eu/
DINPUT
(Analog mode)
OTG CABLE
DINPUT
(Digital mode)
Receiver