Canyon GP-W6 Mode D'emploi page 4

Controller number
1
2
3
4
5
6
7
PC connection/pair Settings
1. Insert Receiver into a PC USB port.
2. The controller LED should turn off.
3. Quickly press the HOME button twice, 4 channel
LED lights should flash.
4. When channel LED1+LED2 stay on, the
connection is successful.
Note: DINPUT needs to
install a driver to have a
vibration function.
RECEIVER
Channel indicate:
The PS3 connect 7 controllers
Glowing LEDs
LED1
LED2
LED3
LED4
LED1+LED4
LED2+LED4
LED3+LED4
RECEIVER
CONSOLE
Channel LED:
when the battery voltage is
lower than 2 V, connected
channel LED(s) flashing warning
lower power, and close the
vibration function.
is normally on
PC
Channel LED:
when the battery voltage is
lower than 2 V, connected
channel LED1+LED2 flashing
warning lower power, and
close the vibration function.
PS3