Nexeo NEXEO2001 Manuel De L'utilisateur page 19

STEPS OF GENERAL USE
1. Turn on the heater by pressing the ON / OFF button on the remote control, the
unit will blow cool air and the "
2. When you press the "MODE" button on the remote control, the unit will emit hot
air and the "
3. When you press the "MODE" button a second time on the remote control, the unit
will emit hot air and both "
4. When you press the "MODE" button three times on the remote control, the unit
will blow out cool air and the "
PS: For smart operation, the customer just press the start button near the master
button, the heater will run on hot air and both lights "
Smart button view:
24H TIMER FUNCTION
1. Turn on the appliance according to the working conditions (fan, warm, hot ...). This
function is performed using the "
2. Press the "
to increase the hours from 00: 00-24: 00 (01: 00 = 1 hour, ... 24: 00 = 24 hours
ect.) and the "
PS: set to "00" means there is no timer set, the light "
19
" and " " lights will turn on.
" "
"button, set the timer up to 24 hours, long press the "
" light is on.
" light will come on.
" lights will turn on.
" light will turn on.
" on the remote control.
" " "are on.
" it is off.
EN
"button