Télécharger Imprimer la page

Uniteck UNIFIX 100.1 WB Manuel De L'utilisateur page 10

Masquer les pouces Voir aussi pour UNIFIX 100.1 WB:

Publicité

Les langues disponibles

Les langues disponibles

EN
UNIFIX 100.1 WB
PANEL COMPATIBILITY
Unfix 100.1 WB can fix 1 panel with 4 holes in the frame at the spacing as below:
127 mm
RECOMMENDATIONS
Mount Unifix brackets only on surfaces with sufficient bearing capacity. Consider the additional load with
the panel:
Support
Unifix 100.1 WB = 3,0 kg Unisun 80.12M /100.12M /100.24M /110.12BC
Fastening: to prevent large quantities of snow from accumulating behind the sensor, install appropriate
barrier grids.
The position of the solar panel influences your electrical production. Choose the most optimal inclination
and orientation to suit your environment. Avoid shaded areas or objects that are a source of shadow (eg
tree)
Before attaching and connecting, please observe:
the maximum distances between each element shown below.
connecting order
SAFETY INSTRUCTIONS
Take the appropriate measures to prevent accidents during your mounting steps.
If the bracket and the mounting tools are exposed to sunlight for a long period, there is a risk
of getting burnt. Make sure to protect yourself accordingly.
When finished, check and ensure that all of your brackets and panels are fixed properly.
10/22
500 mm
Panel
www.uniteck.fr
=6,3kg / 6,8kg / 7,5.kg/ 7,0 kg

Publicité

loading