Bluetooth Radio Pairing Removal Process - MSA G1 SCBA Mode D'emploi

Bluetooth Device Pairing Removal
(8) Select the Write G1 tag button.
(9) Place the G1 SCBA into RFID mode.
(10) Scan the
5.2

Bluetooth Radio Pairing Removal Process

Two Display Radios
• Access the Bluetooth menu and clear all Bluetooth pairing information.
OR
• Press and hold the Bluetooth on/off button - side bottom button (2-dot).
Single Display
• Press and hold the Bluetooth on/off button - side bottom button (2-dot). There will be an audible indica-
tion from the radio that the pairing information was cleared.
US
16
tag onto the G1 SCBA RFID reader.
Bluetooth Pairing Save
Side bottom Button
(2-Dot)
G1 SCBA