Disclaimer; Description And General Specifications; Description; General Specificationdi - Seneca EASY-USB Manuel D'installation

1.0 DISCLAIMER

Before executiong any operation it is advised to read all the content of this
manual. Only electrical-skilled technicians can use the module described in this
installation manual. Is installer's responsibility to assure that the installation is in
compliance to the security standards regulated from the law.
Only the Manufacturer is authorized to repair the module or to replace
damaged components.
No warranty is guaranteed in connection with faults resulting from improper
use, from modifications or repairs carried out by Manufacturer-unauthorised
personnel on the module.
Seneca S.r.l.
Headquarter: Via Germania, 34 - 35127 - Z.I.
CAMIN - PD - IT
Operations: Via Svizzera, 17 - 35127 -
Z.I. CAMIN - PD - IT

2.0 DESCRIPTION AND GENERAL SPECIFICATIONS

The EASY-USB is a serial communication converter that convert the signal from the USB to a
standard UART TTL signal and viceversa.
The EASY-USB can be use to configure a Seneca device that has an UART TTL serial port.
Through the installation of a provided driver for yours OS the EASY-USB will be configured as
a standard communication port, this allow to use the EASY-USB with any configuration
software that exploit the serial standard port (COM1, COM2, etc ).
- Compatible with the main OS
Ö
Windows 98, 98SE, ME, 2000, Server2003, XP.
Ö
Windows XP 64bit.
Ö
Windows Vista.
Ö
Windows XP embedded.
Ö
Windows CE.net 4.2 & 5.0.
Ö
Mac OS 8, 9, OS-X.
Ö
Linux con Kernel 2.4.20 or subsequent, with direct support
- Plug&play for higher revision of WindowsXP.
- Powers the device to be configured
- Communication port pretected from short-circuits
- Compatible with USB up to 2.0
- RJ 11 connetor for UART TTL communication port
- Standard USB A type
- Communication and power supply status are shown from LED
www.seneca.it
MI002381-E

2.1 Description

2.2 General specifications
ENGLISH 2/5