Seneca EASY-USB Manuel D'installation page 10

If installation doesn't start automatically it's necessary to provide a manually installation as
explained in the following instruction.
First and foremost is adviced to have an internet connection to allows the automatic updating
from (http://www.ftdichip.com/Drivers/VCP.htm)
On the next screen follow the directions
At the end of the search a new screen will be show: successfully updated and correct
installation are completed. The EASY-USB will be detected between USB devices and serial
com port on yours control panel.
Disposal of Electrical & Electronic Equipment (Applicable throughout the European Union and other European
countries with separate collections programs). This symbol, found on your producr or on its packaging, indicates that
this product should not be treated as household waste when you wish to dispose of it. Instead, it should be handed
over to an applicable collection point for the recycling of electrical & electronic equipment. By ensuring this product is
didposed of correctly, you will help prevent potential negative consequences to the environment and human health,
which could otherwise be caused by inappropriate disposal of this product. The recycling of materials will help to
conserve natural resources. For more detailed information about the recycling of the product, please contact your
local city office, waste disposal service of the retail store where you purchased this product.
. Configure the startup screen as in Fig 5
MI002381-E
Fig 5
Fig 6
Fig 7
ENGLISH 5/5