Fysic FKW-1000 Guide De L'utilisateur page 31

To stop the wake-up signal:
All manuals and user guides at all-guides.com
As soon as the wake-up time is reached, the clock will sound
an alarm signal. For the first 10 seconds the alarm signal has a
slow rhythm.
In between 10 and 20 seconds the rhythm of the alarm signal
increases. From 20 to 120 seconds the alarm signal has the
fastest rhythm.
Within those 120 seconds, press any button, except "SNOOZE",
to switch off the alarm.
After 24 hours, according to the set wake-up time, the alarm
signal will sound again.
Press the "ALARM" button to fully disable the alarm clock.
Snooze function:
Press the "SNOOZE" button on the front of the clock to stop the
alarm signal and to enable the snooze mode. The snooze icon
Z
starts flashing.
Z
When the snooze mode is activated, the alarm signal will sound
again after 5 minutes. You may activate the snooze function up
to 7 times in a row.
To stop the alarm signal:
By pressing any button, except the "SNOOZE" button, during
the alarm signal or during the snooze function, the alarm signal
will stop. Now press the "ALARM" button to fully disable the
alarm clock. The alarm clock icon will disappear from the
display. The alarm clock is now disabled.
-31-