Fysic FKW-1000 Guide De L'utilisateur page 30

12/24 hours: Press the "+" button to switch between 12 hours
All manuals and user guides at all-guides.com
and 24 hours display format.
Remarks: When you don't press any button for 15 seconds
during the settings, the screen automatically returns to the
normal display.
Alarm clock and snooze settings:
This clock also provides wake-up functions. You may set 1
wake-up times. The alarm clock is activated when the alarm
clock icon appears in the display, by pressing the "ALARM"
button.
While the snooze function is active, the snooze icon Z keeps
Z
flashing.
Every 5 minutes an alarm signal will sound. While the alarm is
active, the alarm clock icon keeps flashing.
To set the wake-up time:
Press the "MODE" button to show the alarm clock time. Now
press and hold the "MODE" button for 3 seconds to open
the alarm clock settings. The hours of the wake-up time are
flashing. Use the "+" and "-" buttons to set the desired wake-
up hours. Press the "MODE" button to confirm your setting.
The minutes of the wake-up time are flashing. Use the "+" and
"-" buttons to set the desired minutes. Now press the "MODE"
button to confirm you setting and the wake-up time is set.
Press the "ALARM" button to activate the wake-up time. The
alarm clock icon appears in the display.
-30-