Control Panel; Status Led; Input And Output Connector - Legamaster STX Serie Manuel De L'utilisateur

4.3. CONTROL PANEL

4.5. INPUT AND OUTPUT CONNECTOR

1
Power
1
Connects the display to power here.
SPDIF
2
Connects external, powered digital speakers or audio receiver/amplifier.
Audio Out
3 Connects external, powered speakers or an external audio
receiver/amplifier.
IR Extender
4
Connects the IR Extender cable provided with the display to this input.
PC Audio In
5
Connects the audio output from a personal computer here.
VGA (D-Sub 15 pin)
Connects components that have RGB or component output jacks,
6
such as a personal computer or external
HDMI 2, 1
7-8
HDCP-compliant digital video inputs for connecting HDMI sources.
DisplayPort
9 DisplayPort 1.2, 1.1a and DisplayPort-HDCP 1.1 compliant, SD/HD input for
connecting SDTV, EDTV or HDTV component video sources.
Key Descriptions
Power Power on/Power off
Source Source selection (toggle)
▲
Volume +
▼
Volume -
2 3 4 5 6

4.4. STATUS LED

LED Illumination
Green
Blinking Orange
Orange
Off
Note:
If the Status LED is set to „Off" in the OSD
menu, the Status LED will not operate.
7 8 9
10 11
Service USB port
A standard type A USB port for service purposes like e.g. firmware
10
upgrades. Only to be used by, or if instructed by, an authorized Legamaster
service technician.
Touch USB 2
11 A standard, Type B USB port for the touch functionality of the display.
Linked to HDMI 2 and VGA in Auto setting.
Touch USB 1
A standard, Type B USB port for the touch functionality of the display.
12
Automatically links to HDMI 1 and DisplayPort
RS-232C
13
A female, 9-pin D-sub connector for interfacing with a PC or control system.
Ethernet
An RJ-45 connector for interfacing with a PC or home theater automation/
14
control system via a Cat 5 cable.
STX-SERIES – USER MANUAL – ENGLISH
INSTALLATION
Condition
Normal operation
No signal
Power Saving
Power off
AC off
12 13 14
11