Taurus CHTA500 Mode D'emploi page 8

- Press during few seconds to confirm day
setting and enter the clock hour setting, with
the screen display: .
-
- Press + and to set the current hour
- Press during few seconds to confirm hour
setting and enter the minute setting, with the
screen display: .
-
- Press + and
to set the current minute
- Press to confirm all settings
- Note: The clock and calendar will be reset to
factory default if without power supply.
HEATING MODE:
- Press to enter mode selection. By pressing
M
,heating mode runs in a continuous cycle
M
as below:
Comfort mode: Press + and
-
the temperature from 5-35°C.
ECO mode: Press + and
-
temperature from 1-31°C.
- Note: ECO mode=Comfort mode - 4°C
- Anti-frost mode: the screen display
target temperature is 7°C. The temperature
can't be adjusted.
- P1/P2/P3: Pre-set heating program.
- Note: If the clock and day setting are not finis-
hed, the first time to enter P1/P2/P3 program
setting, it is requested to set day and clock
setting in advance.
P1: (Monday-Sunday) unadjustable program
P2:(Monday-Friday) unadjustable program
P2:(Saturday-Sunday) unadjustable program
P3:(Monday-Friday)
P3:(Saturday-Sunday)
P3 adjustable program setting
- 1. When under P3 mode, press
to enter day setting.
- 2. The screen displays
set from
confirm and enter hour setting
- 3. The screen displays
to set from 00-24). Press
mode for every hour (Comfort mode
mode
on)
-
to set
- 4. Repeat the operation until you have comple-
ted the schedule of every hour and every day.
-
to set the
- Note: After setting heating mode for hour 23,
press + to come back to day setting.
- Note: when screen displays
. The finish all setting with display of
TIMER OFF FUNCTION
- Press
and keeps flashing. press + and
timer from 0-24 hours. Press
firm setting, then the indicator light
OPEN WINDOW FUNCTION
- Press
is on. If open window function is activated, the
indicator light
heating.
- Press
and back to previous working situation.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- Turn the appliance off using the on/off button.
- Unplug the appliance from the mains.
- Clean the appliance.
- Safety thermal protector:
Adjustable program
Adjustable program
M
, press + and
(Monday-Sunday). Press
, press + and
to choose heating
M
or anti-frost mode for no indicators
, press +
.
one time, the screen display "OH"
again to con-
one time and the indicator light
keeps flashing and stops
again to quit open window function
over 3 secs
-
to
to
M
-
or ECO
-
to set
is on.