Fanaway LED EVO1 Manuel D'installation page 7

Fanaway LED EVO1 Installation Instructions
5) Connect the upper plug (1) from the driver to the lower socket (1) in the LED board (3). Fig.7
6) Select the color temperature (3000K or 4000K) by sliding the switch (2).
7) Connect the upper connector from the motor to the lower connector (1) from the driver. Fig.8
Finally install the lamp shade to the lamp base by turning it clockwise (No.13 – Fig. 1).
8)
Fig. 6
6 | P a g e
Fig. 8
Fig. 7
V e r 1 . 0