Safety Instructions - Heylo PowerVent 8000 Manuel D'utilisation

Ventilator
PV 8000

Safety Instructions

Read and understand manual before operating.
ELECTRIC SHOCK HAZARD
WARNING! Unit must be grounded.
Use indoors only.
Do not operate in standing water.
If motor or wiring gets wet, allow to dry completely before using.
Clean with compressed air or vacuum or wipe with a damp cloth. Do not use hose or
pressure washer.
To reduce the risk of fire or electric shock, do not use this airmover with any solid-state
speed control device.
Insert 3-prong plug on power cord only into outlet with Ground Fault Circuit Interrupting
device.
Never cut off third prong.
FIRE HAZARD
Keep air intakes and grills clear of obstructions and dirt. Reduced airflow can cause
motor to overheat. Keep away from draperies or other material that could block air
intakes.
Keep away from open flames and heat sources.
Do not use or store where flammable vapors such as from gasoline, solvents or thinners
may be present.
SAFETY INSTRUCTIONS
WARNING! Unplug unit before opening housing for cleaning or servicing.
Always operate the unit on a stable, level surface.
•
Turn off unit. Unplug unit before lifting or moving. The powerful airflow can make the
•
unit difficult to control.
Inspect the power cord before use. If cord is damaged, do not use. Replace with a cord
•
of the same type and amperage rating. Protect cord from damage by turning off unit
before unplugging. Always grasp the plug (not pulling on the cord) to unplug.
The unit is designed to operate on a 230V 50 Hz electrical connection. Make sure that
•
the electrical outlet is grounded.
Handle the unit carefully. Do not drop, throw, or place on unstable surface where it
•
could fall. Rough treatment can damage the unit, and may create a hazardous condition
or void the warranty.
Keep children away from unit. Be sure unit is inaccessible to children when it is not
•
attended.
10 EN