Technaxx FMT1200BT Manuel D'utilisation page 14

D: Place your Smartphone into the bracket with a slight push
Operating Instruction
Wireless Charging
The two indicator LEDs will flash in RED ~3 seconds once the
device is powered on.
Before placing your Smartphone into the bracket, make the first
arms (2) are separated and the second arms (3) are closed.
If a Smartphone is being placed which does not support wireless
charging, the two indicator LEDs are flashing in BLUE.
Charging starts as soon as an effective induction field has been
generated. The two indicator LEDs will blink slowly in RED and the
current charging status appears on your Smartphone.
If no connection can be established through induction, you may
have to change the position of your Smartphone.
Charging stops automatically once the battery of your device is
fully charged. The two indicator LEDs will stay in BLUE.