EGO Power+ CH7000 Mode D'emploi page 7

WORK AREA SAFETY
◾
Keep the work area clean and well lit. Cluttered or dark areas invite accidents.
◾
Do not operate power tools in explosive environments, such as in the
presence of flammable liquids, gases, or dust. Power tools create sparks,
which may ignite the dust or fumes.
ELECTRICAL SAFETY
◾
Avoid body contact with grounded surfaces, such as pipes, radiators, ranges,
and refrigerators. There is an increased risk of electric shock if your body is
grounded.
◾
Power tool plugs must match the outlet. Never modify the plug in any way.
Do not use any adapter plugs with grounded power tools. Unmodified plugs and
matching outlets will reduce the risk of electric shock.
◾
Do not expose power tools to rain or wet conditions. Water entering a power
tool will increase the risk of electric shock.
◾
Do not abuse the cord. Never use the cord for carrying, pulling, or unplugging
the power tool. Keep the cord away from heat, oil, sharp edges, or moving parts.
Damaged or entangled cords increase the risk of electric shock.
◾
When operating a power tool outdoors, use an extension cord suitable for
outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric
shock.
◾
Use charge the EGO lithium-ion battery packs list below:
CHARGER
CH7000, CH7000-FC
SERVICE
◾
Have your charger serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the charger is maintained.
◾
When servicing a charger, use only identical replacement parts. Follow
instructions in the Maintenance section of this manual. Use of unauthorized
parts or failure to follow Maintenance instructions may create a risk of shock or
injury.
BATTERY PACKS
BA1400, BA1400-FC, BA2800, BA2800-FC,
BA4200, BA4200-FC, BA1400T, BA1400T-FC,
BA2800T, BA2800T-FC, BA4200T, BA4200T-FC,
BA5600T, BA5600T-FC
56V CHARGER — CH7000/CH7000-FC
7