ADE BR 1704 Mode D'emploi page 25

After that:
1. Press the MODE button twice.
The display will show "RDO".
2. Use the UP button to switch the alarm function on or off.
− On: The upper part of the display shows the selected frequency and two
speaker symbols.
− Off: the display shows - - -.
3. Press and hold down MODE for a few seconds until the hour digit of the alarm time
starts to flash.
4. Use UP and DOWN to set the desired alarm hour.
5. Press MODE.
6. Use UP and DOWN to set the desired alarm minute.
7. Finally, press MODE.
Waking up to a default alarm sound
For this purpose, the device must be turned off (the display shows the temperature,
day and date).
1. Press the MODE button.
The display will show "ALM".
2. Press the UP button.
The display will show a bell symbol and the alarm function is enabled.
3. Press and hold down MODE for a few seconds until the hour digit of the alarm time
starts to flash.
4. Use UP and DOWN to set the desired alarm hour.
5. Press MODE.
6. Use UP and DOWN to set the desired alarm minute.
7. Finally, press MODE twice.
4-in-1 Radio BR 1704 | 1705
Alarm
25