Publicité
Les langues disponibles
Les langues disponibles
ENGLISH /
Connecting with Bluetooth devices
First time setup
Switch to Bluetooth on the remote, MiniPod Bluetooth will automatically start searching for Bluetooth
devices. Now go to Bluetooth function on your device, MiniPod BT appears after a few seconds, choose
MiniPod BT. Now your device is paired with MiniPod Bluetooth.
Choose the content you want to play from your device, and then enjoy your desired music.
(if volume is low, please check your device).
PREV, NEXT, PLAY/PAUSE on the remote can be used when in Bluetooth mode.
Auto Standby
If the MiniPod Bluetooth doesn't receive any signal for 15 minutes it will automatically enter standby mode.
Press the Power On button to turn the MiniPod Bluetooth speakers back on, after entering standby mode.
ENGLISH /
Running-in period
We recommend a running-in period of your new MiniPod Bluetooth speakers of approximately 15-20 hours at normal listening level before you decide on the final positioning of
the speakers. During the running-in period, the drive units will settle in and perform as intended.
ENGLISH /
Care and cleaning
We strongly advise against the use of any solvents or cleaners on the lacquered MiniPod Bluetooth cabinets. The cabinet surface usually only requires dusting or cleaning with a
damp soft cloth (only use cold clean water). Avoid touching the drive units, especially the tweeter, as damage may result.
ENGLISH /
Environmental information
MiniPod Bluetooth complies with international directives on the Restriction of Hazardous Substances (RoHS) in electrical and electronic equipment and the disposal of Waste Electri-
cal and Electronic Equipment (WEEE) - the crossed bin symbol indicates compliance and that the products must be appropriately recycled or processed in accordance with these
directives.
// 9
Publicité
