wAppLoxx Control finder
26
Accessing the wAppLoxx Control for the first time
• The wAppLoxx Control is accessed for the first time using the
wAppLoxx Control finder.
• After the wizard has launched, it searches for all the wAppLoxx
Controls connected to your network.
• You can find the program by clicking on the following link:
www.abus.com/uk/wapploxx. Install the program on your PC
and then run it.
• If a DHCP server is available on your network, the IP address is
assigned automatically for both your PC/laptop and the wAppLoxx
Control.
• If no DHCP server is available, the wAppLoxx Control automatically
sets the following IP address: 192.168.0.50.
• Your PC system must be located on the same IP subnet in order to
establish communication with the wAppLoxx Control.
English