Network Connection - Abus wAppLoxx Control 505272 Guide De Démarrage Rapide

Network connection

There are two ways to set up the network:
1
Option 1:
24
Connecting the wAppLoxx Control directly
to a PC/laptop
• Use the network cable supplied to connect the
wAppLoxx Control and PC/laptop to one another.
• Connect the wAppLoxx Control to the power supply.
The wAppLoxx Control automatically detects
whether a direct connection between the PC and
Control should be established.
• Configure the network interface of your PC/laptop to
the IP address 192.168.0.2, the default gateway to
192.168.0.1 and the subnet mask to 255.255.255.0.
• Open the wAppLoxx Control finder after installing the
software from the Software-CD.
English