Batavia BT-CLB005 Mode D'emploi page 14

.
English
charge level. The right LED indicates a high charge
level and the left a low charge level that will mean
the battery pack will require charging soon.
IMPORTANT: When a low charge level is indi-
cated be aware the tool may stop operating while
using the tool. In some instances this may be
dangerous. It is recommended to always ensure
the battery pack has a good charge level.
Notes about Battery Charging
•
•
•
•
•
•
14
63905&7063915-Batteries-Ma-A7-2108-06.indb 14 63905&7063915-Batteries-Ma-A7-2108-06.indb 14
Let a hot battery cool down before charging it.
The battery should be charged at ambient
temperatures between 10 °C and 40 °C (ide-
ally around 20 °C).
After charging, allow 15 minutes for the bat-
tery to cool before use.
Ensure that the charger is disconnected from
the mains supply after use, and is stored
correctly.
Do not leave batteries on charge for extended
periods and never store batteries on charge.
The battery charger monitors battery temper-
ature and voltage while charging. Remove the
battery once charging has been completed to
06-08-2021 11:1 06-08-2021 11:1