Télécharger Imprimer la page

Top Innovations SteamFast SF-680 Mode D'emploi page 9

Presse à vapeur numérique pour tissu

Publicité

Les langues disponibles

Les langues disponibles

AUTO SHUT-OFF
The Auto Shut-Off feature of the Digital Fabric Steam Press includes both an Auto
Shut-Off and an Auto Wake-Up. These multiple function safety features deactivate
electrical power to the heater when the Pressing Plate has been left in closed position
against the Ironing Board for more than 10 seconds. Heater deactivation is signaled
by a beeping sound. Heater functionality is restored when the Pressing Plate is lifted
back up.
Power to the heater will also be cut if the Pressing Plate is left in the lifted position
without use for approximately 15 minutes (signaled by a continuous beeping sound).
The heating ability of the unit can be restored either by resetting the On/Off Switch,
or by pressing the Temperature Control Buttons.
IMPORTANT: Auto Shut-Off does not mean that power to the unit is totally
cut off. Power is always on, and the Power Indicator Light will remain
illuminated until On/Off Switch is set to "Off" (O) position (FIGURE 1, page 7).
CLEANING THE D
1. Fill Water Reservoir with water using procedure on page 7 of this manual.
2. Place Pressing Cushion in the middle of Ironing Board.
3. Place a clean towel over Pressing Cushion and Ironing Board.
4. Set Temperature Control Buttons to the highest setting (LINEN).
5. When Steam Burst Ready Indicator Light illuminates, lower Pressing Plate onto
Pressing Cushion.
6. Press Steam Burst Button six times.
7. Allow Pressing Plate to cool.
8. Clean Pressing Plate with damp cloth. Do not use abrasive materials, as this may
damage Pressing Plate.
9. Ironing Board fabric cover is removable for cleaning. Hand wash only with mild
detergent.
PROPER STORAGE
1. Once pressing is complete, immediately turn unit off and unplug power cord from
electrical outlet.
2. Allow unit to cool completely (at least 30 minutes).
3. Lower Pressing Plate down, and turn Locking Knob to "Lock" position.
4. Wrap up power cord and place in Cord Storage Compartment.
5. Store all accessories safely away, preferably near Digital Fabric Steam Press.
6. Store Digital Fabric Steam Press in a cool, dry place.
C
& S
ARE
F
S
IGITAL
ABRIC
Top Innovations, Inc.
G
TORAGE
UIDELINES
P
TEAM
RESS
9

Publicité

loading