Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Steps to Replace the Blade
1.
Remove the Ice Tray and insert the Disassembly Tool (K) over the three arms of the Spinner.
2.
Once the Disassembly Tool (K) is properly inserted, twist counter-
clockwise (as the arrow shows) and lift the Spinner out.
3.
Carefully press the tabs of the Blade Housing inward and lift up to release.
4.
Twist off the Blade Cap and, using extreme caution, remove the Blade
Cartridge. Insert the replacement Blade Cartridge, and reverse the above
steps to reassemble. USE EXTREME CAUTION. BLADE IS VERY SHARP.
5.
When replacing the Spinner, reverse all steps and make sure
to lock Spinner using the Disassembly Tool.
12
Publicité
Chapitres
Table des Matières
