Axis M32 Serie Mode D'emploi page 8

Page 8
AXIS IP Utility - single camera/small installation
AXIS IP Utility automatically discovers and displays Axis devices on your network. The application
can also be used to manually assign a static IP address.
Note that the computer running AXIS IP Utility must be on the same network segment (physical
subnet) as the AXIS M32 Series.
Automatic discovery
1. Check that the AXIS M32 Series is connected to the network and that power has been applied.
2. Start AXIS IP Utility.
3. When the camera appears in the window, double-click it to open its home page.
4. See page 10 for instructions on how to assign the password.
Assign the IP address manually (optional)
1. Acquire an unused IP address on the same network segment as your computer.
2. Select the AXIS M32 Series network camera in the list.
3. Click the button
4. Click the Assign button and follow the on-screen instructions. Note that the camera must be
restarted within 2 minutes for the new IP address to be set.
5. Click the Home Page button to access the camera's web pages.
6. See page 10 for instructions on how to set the password.
Note:
AXIS M3203-V and AXIS M3204-V will display in AXIS IP Utility as AXIS M3203 and AXIS
M3204.
Assign new IP address to the selected device and enter the IP address.
AXIS M32 Series Installation Guide