Maintenance - Ironside Prolaser 3D All-Lines Mode D'emploi

MAINTENANCE

To maintain the accuracy of your project, check the accuracy of
your laser level according to the field calibration tests procedures.
• Change the battery when the laser beams begins to dim.
• Wipe the aperture lens and the body of the laser level with a clean
soft cloth. Do not use solvents.
• Although the laser level is dust and dirt resistant to a certain
degree, don't store in dusty places as long term exposure may
damage internal moving parts.
• If the laser level is exposed to water, dry the laser level before
returning it to the carrying case to prevent corrosion damage.
• Remove the battery if the laser level is unused for a long period of
time to prevent corrosion damage.
102494
13