Publicité
Les langues disponibles
Les langues disponibles
Key OK:
Stops the movement of the wall holder and/or confirms an action.
Key mem 1:
Storage key 1 for saving the current position. Run the wall holder into the desired position
manually and press this key for 5 s until the wall holder beeps twice. Position 1 has been
saved.
Key mem 2:
Storage key 2 for saving the current position. Run the wall holder into the desired position
manually and press this key for 5 s until the wall holder beeps twice. Position 2 has been
saved.
Key 1:
Press key 1 and then press OK in order to have the wall holder run to the saved position 1.
Key 2:
Press key 2 and then press OK in order to have the wall holder run to the saved position 2.
SET key:
Learning function for the original TV remote control (see "Learning function").
When the wall holder is disconnected from the power supply, it will beep again when it is being
reconnected to the power supply. Then, press OK to set it back to operational condition. When
doing so, the saved positions 1 and 2 will not be deleted.
Learning feature
Due to the very different IR transmission codes of the TV manufacturers, it can happen that the
wall holder can not or only partly learn the IR codes. In this case, please operate the wall holder
using the enclosed remote control.
Only use the keys on the TV remote control for the operation of the wall holder that do not trigger
an immediate action of the TV set. Otherwise, the TV set would react simultaneously to the wall
holder when these keys are being pressed.
The functions of the keys G, ►, S, F and OK can be learned by most of the original TV remote controls.
This means that you can operate the basic functions of the wall holder with your TV remote control after it
has learned them.
1. Press the SET key for 5 seconds until the LED on the upper left lights permanently.
2. Then, press OK. The wall holder beeps once and the LED in the IR receiver lights.
3. In order to learn the G key, press this key until the wall holder beeps twice.
4. The LED in the IR receiver blinks slowly and is ready to learn the IR commands.
5. Point the TV remote control to the IR receiver and press the key that is supposed to take over the func-
tion of the G key until the wall holder beeps three times.
6. The LED in the IR receiver now flashes rapidly.
7. Press OK until the wall holder beeps four times. The LED in the IR receiver goes off and the Gfunction
was saved.
If the wall holder only beeps once after the last step, an error has occurred. In this case, try to
repeat the learning procedure. You could also try to use another key of the TV remote control. If
this is not successful, the TV remote control is not compatible with the learning function.
If you do not press a key for 20 seconds, the wall holder exits the learning mode and you will
have to start from the beginning.
8. Repeat steps 1-7 to learn the other four keys.
Learning function POWER
1. Press the SET key for 5 seconds until the LED on the upper left lights permanently.
2. Then, press OK. The wall holder beeps once and the LED in the IR receiver lights.
3. Press key 1 until the wall holder beeps twice.
4. The LED in the IR receiver blinks slowly and is ready for learning the POWER command.
5. Point the TV remote control to the IR receiver and press the POWER key until the wall holder beeps
three times.
6. The LED in the IR receiver now flashes rapidly.
7. Press OK until the wall holder beeps four times. The LED in the IR receiver goes off and the POWER
function was saved.
When you now press the POWER key on your TV remote control, the wall holder runs to its rest position.
This has the advantage that the wall holder runs to the parking position automatically once the TV set has
been switched off.
Maintenance and Care
The product does not have to be serviced and, except for occasional cleaning with a soft, dry cloth, requires
no maintenance whatsoever.
Never use aggressive cleaning agents or chemical solutions as these may damage the surfaces.
Disposal
Product
Electronic devices are recyclables and must not be disposed of in the household waste!
Please dispose of the product, when it is no longer of use, according to the current statutory
requirements.
Remove the battery if there is one inserted and dispose of it separately from the product.
Batteries and Rechargeable Batteries
As the end user, you are required by law (Battery Regulation) to return used batteries and rechargeable
batteries. Do not dispose of used batteries in the household waste!
Batteries/rechargeable batteries contain harmful materials and are labelled with the symbol
shown to indicate that disposal in the household waste is forbidden. The symbols of the critical
heavy metals are: Cd=cadmium, Hg=mercury, Pb=lead (marking can be seen on the battery/
rechargeable battery, e.g., underneath the refuse bin symbol shown on the left).
You can return used (rechargeable) batteries free of charge at the official collection points in
your municipality, our stores, or where ever (rechargeable) batteries are sold!
You thereby fulfil your statutory obligations and contribute to the protection of the environment.
Technical Data
Operating voltage ........................100-240 V/60/50 Hz (power pack)
.....................................................12 V/DC (wall holder)
Batteries remote control ..............2 x 1.5 V micro-cell (AAA)
TV size .........................................81-140 cm (32-55")
Load capacity ..............................max. 35 kg
VESA fixture ................................75 x 75
.....................................................100 x 100
.....................................................200 x 100
.....................................................200 x 200
.....................................................300 x 300
.....................................................400 x 200
.....................................................400 x 400
Wall distance ...............................54-304 mm
Pivoting angle ..............................90° (wall arm)
.....................................................±30° (TV base plate)
Material ........................................steel / plastic
Weight .........................................approx. 5.3 kg
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent the
technical status at the time of printing.
© Copyright 2014 by Conrad Electronic SE.
Publicité
