Conceptronic SRC01G Guide Rapide page 2

ENGLISH
 Conceptronic 2 ports serial PCI Express card
 Product CD-ROM
 This multi language quick guide
 Turn Off the power to your computer.
 Unplug the power cord and remove your computer's cover.
 Remove the slot bracket from an available PCIe slot.
 To install the card, carefully align the card's bus connector with the selected PCIe slot on
the motherboard. Push the board down firmly.
 Replace the slot bracket's holding screw to secure the card.
 Replace the computer cover and reconnect the power cord.
Your computer will show the "New Hardware Wizard" on your screen. You can ignore this
"New Hardware Wizard" by clicking "Cancel".
 Insert the CD-ROM in the optical drive of your computer. The AutoPlay option will be
shown automatically. Click on "Run Autorun.exe" to start the autorun menu.
 Select "Install Drivers" and follow the onscreen instructions to install the required drivers
for the serial PCIe card.
 When the driver installation is complete, restart your computer to ensure the drivers are
correctly loaded.
Conceptronic SRC01G
1. Package contents
2. Installation & usage
3.