Publicité
Les langues disponibles
Les langues disponibles
Automatic time setting
.
Press and hold
the automatic time adjusment.
Manual time setting
It is not possible to set the time manually while the
clock is searching for an RCC signal, please wait until
the
indicator is off.
.
Press
blink on the display.
on the display. .
.
Turn the jog wheel to set the hours and press the jog
wheel button to confirm. The minutes will blink on
the display.
3.
Turn the jog wheel to set the minutes and press the
jog wheel button to confirm.
Note!
The adjustment of the analog clock can take up to
30 minutes to complete. During the adjustment, the
analog clock will not show the correct time. Do not
disconnect the power during adjustment since this
could damage the clock.
until
. The display will light up and the hours will
English
is displayed to update
3
Publicité
