Publicité
Les langues disponibles
Les langues disponibles
•
RECOMMENDED MINIMUM WIRE SIZE FOR EXTENSION CORDS:
•
DO NOT
ventilation slots and result in excessive internal heat. Place the charger in a position away from any heat source.
The charger is ventilated through slots in the top and the bottom of the housing.
•
DO NOT
•
DO NOT
•
Disconnect the charger from the outlet before attempting any cleaning. This will reduce the risk of electric
shock. Removing the battery pack will not reduce this risk.
•
NEVER
attempt to connect 2 chargers together.
•
The charger is designed to operate on standard household electrical power (120 V) or (240 V) with proper
country plug
How to Use:
Selecting the Nozzle
Rotate the nozzle clockwise to change the
size of the particules.
Setting 2:
80 microns
Setting 1:
40 microns
This side is fully illuminated
when empty.
6
Parts & Operations Manual
Total Length of Cord 25 ft., 50 ft., 75 ft., 100 ft., 125 ft., 150 ft., 175 ft., 7.6 m, 15.2 m, 22.9 m, 30.5 m,
38.1 m, 45.7 m, 53.3 m,
Wire Size AWG 18, 18, 16, 16, 14, 14, 12
place any object on top of charger or place the charger on a soft surface that might block the
operate charger with damaged cord or plug — have them replaced immediately.
operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way.
Setting 3:
110 microns
Charging the Battery
(2 hours charge time)
This side is fully
illuminated when
charged.
Victory Series
Align arrow to the
line on the nozzle.
The nozzle located
at the bottom is the
one activated.
Publicité
