Garmin GHS 20 Instructions D'installation page 3

GHS 20/20i Installation
™
Instructions
These installation instructions are for the
GHS 20 and GHS 20i handsets. The GHS 20
is for use with the Garmin
radio and the GHS 20i is for use with the
Garmin VHF 200i or 300i radio.
For additional information, refer to the
installation instructions provided with your
radio. For operational instructions, refer
to the owner's manual provided with your
radio.
Compatibility
Your existing VHF 200/200i or
VHF 300/300i radio may need a software
update to work with the GHS 20/GHS 20i.
Consult your Garmin dealer or contact
Garmin for information.
About the GHS 20/20i
The GHS 20/20i handset ➊ comes with a
GWH 20 receiver ➋, a charging cradle ➌,
™
a belt clip, and the necessary mounting
hardware.
GHS 20/20i Installation Instructions
VHF 200 or 300
®
➊
➌
➋
On a VHF 200/200i ➍, the GWH 20 will
only function correctly when connected to
the microphone relocation port in the back.
On a VHF 300/300i ➎, the GWH 20 will
only function correctly when connected to
the STATION 3 connector ➏.
Both the GHS 20/20i handset and the
GWH 20 receiver should be at least
23 / in. (60 cm) from any compass to avoid
5
8
interference.
➋
➍
➎
➏
EN-3