Dake SLTC93 Instructions Pour L'installation, L'emploi Et L'entretien page 18

An air deflector is available as an accessory (not
for SL96 model ), in order to direct the air co-
ming out of the motor towards the grids of the ste-
el decorative pipes (fig. 14); the air deflector shall
be connected to the motor air out-let with a suita-
ble pipe, which is not supplied with the product.
WORKING
Mod. SL TC – Glass (dis. 15)
A: Light switch On/Off
B: Reduce speed / OFF motor
C: Luminous telltale
D: ON motor/incrase speed
E: 10 - minute timer
The touch control key allows the function desired
by touching the relative key. If the electrical power
supply to the product SLTC is cut, 15 seconds are
needed for selfdiagnostics after the functions are
restored. In the meanwhile, its operation may be
incorrect.
SLTC93: The product works even if the panel is
closed. We anyway suggest to open it as shown
in (pic. 9) if high speeds are set.
SLTC94: The ceramic front panel must be ope-
ned (pic. 8) only during service or filter mainte-
nance.
Mod. SL (dis. 16)
A: Light switch on/off
B: Motor switch on/off (1st rate level)
C: 2nd rate level switch
D: 3rd rate level switch
E: 4th rate level switch
F: 10 - minutes timer
After 30 hours working model SL96 ), the push
button control panel will signal the saturation of
the grease filter by lighting all the buttons.
For the models SLTC (Control Version). The sa-
turation of the filter is indicated by the flashing
speed indicators.
Press the timer button to reset.
18