Télécharger Imprimer la page

Fonexion ideus ITCAB200 Guide D'utilisation page 23

Publicité

Les langues disponibles

Les langues disponibles

USER GUIDE
Press SET key again, LCD displays CODE- - - - -
Press ▲ or ▼ key to set the first digit of local area code;
Press SET key to confirm and enter the second digit setting,
by using the same method to set the last 4 digits.
Unit will save and quit after 12 seconds.
Note:
If the local area code only 4 digits, the last digit can be left
as "-".
After set the local area code, unit will auto-filter the area
code if the incoming call number with the first several bits as
same as the local area code.
SETTING PABX CODE
At on hook state, press SET key
Press ▲ key twice, LCD displays SET 3 PCODE.
Press SET to confirm, LCD displays PCODE--
The first "-" flashes and indicates to set the first code.
Press ▲ or ▼ key to set the first code, Press SET key to
confirm to enter the next one.
Unit will save and quit after 12 seconds.
Note:
If only one digit of PABX code, left the second digit as"-".
If set PABX code, when dialing back incoming call, and if the
incoming number is more than 6 digits, unit will auto-add
PABX ahead the number and pause 1 second.
SETTING DIALING MODE
At on hook state, press SET key
Press ▲ key four times, LCD displays SET 5 P-T
Press SET to confirm, LCD displays TONE
Press ▲ or ▼ key to select PULSE or TONE
Press SET to confirm.
Unit will save and quit after 12 seconds.
SETTING LCD CONTRAST FUNCTION
In on-hook state, press SET key and then press ▲ key sixth, LCD
ITCAB200
23
EN

Publicité

loading