Fonexion ideus ITCAB200 Guide D'utilisation page 22

ITCAB200
Reviewing outgoing Call
In on-hook or off-hook state
Press OUT key, LCD displays the last dialed number.
Press OUT key continuously, LCD displays ...END... when
all records are checked.
Dial back outgoing Call
In on-hook state or off-hook state.
Press OUT key to check the desired number.
Press BACK or REDIAL key, the number will be dialed out
automatically, then pick up the handset to conversation. If
the line is busy, press REDIAL key to dial out the number
repeatedly.
Deleting outgoing Call
Review the desired outgoing number
Press DEL key to erase the number. LCD displays the next
number.
Note: Press DEL key for 3 seconds, all the outgoing calls
will be erased.
4
SETTINGS
SETTING DATE AND TIME
In on-hook state, press SET key, LCD displays SET 1 DATE
Press SET key, the last two digits of year flash.
Press ▲ or ▼ key to edit the year, Press SET key to confirm,
by using the same method to set the month, date, hour and
minute.
Unit will save and quit after 12 seconds.
Note: Scope: Month: 1-12
Minute:00-59
SETTING LOCAL AREA CODE
At on-hook state, press SET key and then press ▲ key, LCD will
display SET 2 CODE
22
EN
USER GUIDE
Date: 1-31 Hour:00-23