Télécharger Imprimer la page

BETTE AQUA Instructions De Montage page 2

Publicité

Wichtige Informationen –
DE
Bitte beachten!
Symbolerklärung
Optional
Verweis auf andere Produkte oder
Dokumentationen
Allgemeine Hinweise
• Eine Gewährleistung in Bezug auf Sicherheit, Funktion
und Unversehrtheit des Produkts kann nur geleistet
werden, wenn die Hinweise in dieser Anleitung beachtet
werden. Bei Missachtung können Körperverletzungen
und Sachschäden auftreten. Für Schäden, die durch
Nichtbeachtung der Anweisungen eintreten, haftet der
Hersteller nicht.
• Um Montagefehler und Schäden am Produkt zu
vermeiden, ist unbedingt nach den Anweisungen der
Montageanleitung vorzugehen.
• Neben den Hinweisen in dieser Anleitung sind die
allgemein gültigen Sicherheits- und Unfallvorschriften zu
beachten.
• Das Produkt hat das Werk in sicherheitstechnisch
einwandfreiem Zustand verlassen.
• Maßangaben in Millimeter (mm).
• Abbildungen nicht maßstabsgerecht.
• Technische Änderungen vorbehalten.
Montagehinweise
• Die Montage darf nur durch einen Fachmann erfolgen.
• Der Bauuntergrund muss für die Aufnahme des
Gewichtes geeignet sein.
• Um Beschädigungen am Produkt zu vermeiden, muss
es mit größter Sorgfalt behandelt werden. Ringe und
andere Gegenstände die das Produkt beschädigen
können, müssen vor der Montage abgelegt werden.
• Schwere und sperrige Elemente müssen mit zwei
Personen montiert werden.
• Starke Belastungen (z. B. Draufsetzen) können zu
Beschädigungen an der Waschtischkonstruktion führen.
Separate Dokumentationen (z. B. für Ablauf-
garnituren) sind zu beachten.
2
Important information –
EN
Please note!
Key to symbols
Optional
Cross-reference to other products or documents
General advice
• The function, safety and integrity of the product are only
guaranteed if the instructions given in this manual are
adhered to. Non-observance of the safety instructions
could lead to bodily injury and damage to property.
• The manufacturer is not liable for damage resulting from
non-observance of the instructions.
• To avoid installation errors and damage to the product, it
is essential that the installation instructions are followed
carefully.
• Besides the information given in this manual, please
follow the relevant general safety and accident
prevention regulations.
• This product left our factory in a condition complying
with all the requirements of technical safety.
• Measurements are indicated in millimetres (mm).
• Figures are not true to scale
• Subject to technical modiications.
Installation instructions
• For installation by trained craftsmen only.
• The underlying structure must be suitable for bearing the
weight involved.
• Handle this product with the utmost care to avoid
damaging it. Rings and other objects that may damage
the product must be removed before starting the
installation work.
• Large, bulky or heavy items must be installed by two
people.
• Heavy loads (e.g. sitting on it) can result in damage to
the vanity unit structure.
Separate documents (e. g. for drain sets) should be
complied with.

Publicité

loading

Ce manuel est également adapté pour:

OneLuxComodoLoft ornament