Description; Transmitter; Overall Description - Chauvin Arnoux C.A 6681 LOCAT-N Notice De Fonctionnement

2.1 TRANSMITTER

2.1.1

OVERALL DESCRIPTION

Fig.2
C.A 6681 Cable locater

2. DESCRIPTION

(1) LCD screen.
(2) On/Off key
(3) Key for adjustment / confirmation of the
transmit power level (Level I, II or III).
(4) Start / Stop Transmission key.
(5) Key for adjustment/confirmation of the code
information to be sent. Press this key for 1
second to activate the code selection mode
and press briefly to exit from this mode (the
codes F, E, H, D, L, C, Y, and A can be
selected; F is the default).
(6) Lower the transmitted power level or
change the transmission code.
(7) Raise the transmitted power level or
change the transmission code.
(8) Key for activation or de-activation of the
silent mode (in silent mode, key presses and
the buzzer are silent).
(9) Torch On/Off key.
(10) "+" input/output terminal for measurement
of the voltages present and application of the
signal to the object being tested.
(11) "COM" input/output terminal. Earthing
terminal.
English
43