Masquer les pouces Voir aussi pour Verge LVLD3:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

LVLD3
1

Frame Mounting

Typical installation is shown. It may be necessary to repair the wall
after mounting. The fixture may not cover all of the wall modifications.
A
Fasten plywood securely
to at least (4) studs.
16"
(406mm)
centers
14"
(356mm)
A
Floor
Fasteners (supplied by installer)
to secure backing to studs
8
Minimum required to
pick up four studs and
vertical frame members
– 56" (1422mm) min.
Drywall
D
6/3/2016
Support Backing Mounting
Standard Height, ADA and TAS
ADA, Juvenile and TAS, Grades
C
(1422mm)
Use
" fasteners and square washers provided to secure the
3
8
frame to plywood (9) places. Shim frame as necessary.
Bradley • 215-1779 Rev. E; ECN 16-08-008
"A" Dimension
Height
20" (508mm)
17" (432mm)
6 thru 12
Drain, supplies and electrical box are
shown in their approximate locations.
B
Cut clearance holes in the plywood as
required.
NOTE: Plywood should equal the
thickness of the drywall (½" minimum).
Shim the frame at anchor points to
ensure the offset bracket is straight.
Leave the top three screws loose
for bowl installation.
56"
Installation

Publicité

Table des Matières
loading

Table des Matières