Busch-Jaeger 6401 U-102 Mode D'emploi page 67

Operation
• MEMO:
• ALL OFF:
d. Operation with FM Sensors
After the supply voltage has been interrupted, or after
connection to the supply system, irrespective of the
degree of brightness measured , the Insert 6401 U-102
switches connected consumers on again
- for approx. 80 seconds in the case of FM Sensors 6810-
xxx-10x and, in the case of FM Sensors 6800-xxx-
10x(M),
- for the time set (at least 1 minute with time settings of < 1
minute, with the exception of the short-time impulse
- Select control state
- Store MEMO
- Invoke MEMO 1 or 2
Relay Insert switches OFF
GB
).