Avidsen 123985 Mode D'emploi page 28

D - CONFIGURATION
Note: if you are powering the device with a
USB cable, the response you provide is of no
consequence.
Then scan the QR Code that appears underneath
the camera:
2
1
QR Code capturing zone
2
If you have a photo of the QR Code, you can
use it by clicking here
3
You can also enter the ID of your camera
manually by clicking here (the UID takes the
format ABCD-123456-EFGHIJ and is marked
on the camera near to the QR Code)
10
EN
BATTERY-POWERED 720P IP WIFI CAMERA
1
The app then asks you what network and what
key it must send to the camera for internet access.
By default, the name of the WiFi network is that to
3
which your smartphone is connected.
Important:
Camera network compatibility: 2.4 GHz - 20/40
auto - WPA/WPA2.
Not compatible with 5 GHz WiFi, not compatible
with WEP encryption.
Please check the WiFi settings of your gateway
with your Internet service provider if you experience
connection diffi culties.
Click on CONNECTER AU WIFI (CONNECT TO
WIFI) after having indicated the WiFi network to be
used and the corresponding key.
The app will ask which password to associate with
your camera. This password will have to be entered
by any user providing them with access to the
camera and images. We recommend a password
with at least 8 characters and a combination of
letters, numbers and special characters.