Kobalt KHD 524B-03 Mode D'emploi page 12

OPERATING INSTRUCTIONS
11. Auxiliary Handle
This hammer drill is equipped with an auxiliary handle (H). For ease of operation, you can use the
handle with either your left or the right hand. The handle can be locked in any of three positions.
To install the auxiliary handle:
a. Place the direction-of-rotation selector (F) in the center-lock position.
b. Loosen the auxiliary handle by turning the handle counterclockwise.
c. Align the raised portion on the auxiliary handle with the grooves on gear box of the hammer
drill, then slide the auxiliary handle onto the tool as shown.
d. Hand-tighten the handle by turning the handle clockwise.
To remove the auxiliary handle:
a. Place the direction-of-rotation selector (F) in the center-lock position.
b. Loosen the auxiliary handle by turning the handle counterclockwise.
c. Remove the auxiliary handle from the tool.
WARNING
• For safety and ease of operation, securely tighten the auxiliary handle by turning the handle
clockwise before every use.
11
H
F
12