Powerplay PJR 2000PC Mode D'emploi page 8

ASSEMBLY INSTRUCTIONS
6
1
Unlocked
Locking Spray Gun (before Lance installation)
To lock trigger of spray gun (I), point gun away
from you and turn dial to lock ("3" and "9" position).
Squeeze or pull trigger to make sure it is locked.
ALWAYS leave in locked position when not in
use. This ensures the gun is in "safe" mode until it
is ready for use. Turn dial to unlock ("12" and "6"
position) to release spray gun trigger.
Note: The trigger lock prevents trigger from being
accidentally engaged.
8
94260_PJR 2000 PC ENG-FR-SP .indd 8
I
Locked
7
I
G
High/Low Nozzle Lance and Turbo Nozzle Lance
Installation
While the spray gun (I) is in the locked position, insert
the high/low nozzle lance (F) or turbo nozzle lance (G)
into the end of the spray gun, by inserting and pushing
together turning clockwise simultaneously. To remove,
push together and turn counterclockwise.
Note: Always push the safety lock button to lock the
trigger when changing lances to ensure that they do not
accidentally eject with force during removal.
Note: When using the turbo lance, make sure the turbo
nozzle is screwed on tight at the end of the lance each
time you use it.
Note: Turbo nozzle is not adjustable.
F G
17/2/17 上午10:14