ELECTRIC CIRCUIT LOCATOR: This system will inform the operator when the two cords are plugged into separate circuits by turning on the green, circuit
locator light (A). This helps to prevent tripping circuit breakers.
NOTE: If the green circuit locator light (A) does not illuminate when the cords are plugged in, then both cords are on the same circuit. Try other outlets with one
of the cords until you get the locator light to come on.
NOTE: If the bypass switch is turned on when both cords are on the same circuit, the breaker in the wall may trip.
BALL FLOAT SHUT-OFF
When the recovery tank is full, the ball fl oat will disable the vacuum suction. This will prevent water from entering the vacuum motor. The fl oat may not work
properly if the vacuum inlet fl oat fi lter is dirty or if there is heavy foam in the tank.