Zoef Robot Hendrik-Jan Mode D'emploi page 99

6. The mower does not return to the charging station for charging.
a) The fence line is too long. The battery lever is not enough to return the
mower to the charging station. Turn off the mower and carry it to the station.
b) If the mower was stopped by obstacle it will stop working
7. Subarea function is failure.
Every working area need to set working time.
8. The island can not work.
The island should be circle
9. The mower make a circle in the island and never go to the working area.
The mower will go around 3 circles, then go to the working area.
Functions：
A) Select the mowing route intelligently;
B) Avoid collisions intelligently;
C) T ake shelter from rain intelligently;
D) Return to charging station for charging intelligently;
E) Safe protection intelligently.
Technical Specifications
Model
Cut
Operating voltage
Cutting power
Engine speed
Loading time
Average operating time
Cutting width
Cutting height - 3 positions
Mowing capacity for each recharge
Protection class
Insulation class
Loading station
Battery for remote control
Noise
Weight
， 。
not square
Hendrik-Jan MR13Z
590x580x230 mm
24V
140W
5000 min
+/- 4h30
+/- 2h30
320 mm
30-50mm
500 m²
IPX 1
III
Entrance AC100-240V 1500mA
50/60Hz
Output: DC24V-DC29.4V
IP 67
1x 23A 12V
L 73 dB
WA
9.85 Kg
-1
1.5°