Warning Symbols; Machine Symbols - Garland 932 SG Manuel D'instructions

English

3. WARNING SYMBOLS

Warning labels indicate required information for the
use of the machine.
Warning and care.
Do not let people enter in the work area.
This area will be of a diameter of 0,5
meters from the point in which you are
0,5 M
working.
Use protective non skid boots with
protective steel.
Use appropriate security gloves.
It is necessary to use eye and acoustic
protection at any time.
It is necessary to read this manual
carefully before using this machine.
DANGER! Do not bring feet or other body
parts to the auger when the engine is
running.
ELECTRICAL HAZARD! Make sure there
are no electrical wires buried in the area
to be drilled
Caution! Hot Surface.
Sense of rotation.
Do not smoke or bring a flame to the
combustible or the machine.

4. MACHINE SYMBOLS

In order to ensure safe operation and maintenance of
the machine are the following symbols in the machine.
Fuel tank. Located in the combustible
tank cap. Mix 2 stroke oil and gasoline.
Air positions:
Open = Normal operating position.
Located in the top of the filter.
Abierto= Posición normal de
funcionamiento. Situado en la tapa del
filtro.
Position for starting the machine in cold.
Located on the of air filter cover.
Position for starting the machine in cold.
Located on the of air filter cover.
0
Positions start switch located on the right
STOP -
handle of the machine.
"O" = Off (The machine don´t work)
I
"I"= On (The machine is ready to work)
Never use only fuel or fuel in a bad
state. Mix unleaded fuel grade 95
and synthetic oil for 2 stroke engines
to 2.5% (40:1).
START
Starter handle.
30/132