Function Modules - Lenz E94ASHE Single Drive HighLine Série Instructions De Montage

6 Wiring the device modules

Function modules

6.2 Function modules
Use these modules in slot
Digital frequency
Connections
Pos. Description
X9 Input for digital frequency, 9-pole Sub-D plug
X10 Output for digital frequency, 9-pole Sub-D socket
X9
5
9
1 6
SUBD09010
76
MXI1 or MXI2
Pin Designation Explanation
1 B
2 A TTL input signal from encoder or encoder simulation
3 A
4 +5 V Regulated voltage supply for encoder
(pin 8 = sense has to be used)
5 GND -
6 Z
TTL input signal from encoder or encoder simulation
7 Z
8 The function of this lead has to be set in the standard device:
S Sense (sensor lead for voltage regulation, Lenze setting)
Lc Lamp control
E Enable
9 B TTL input signal from encoder or encoder simulation

MMI MSI.
EDK94SH104 DE/EN/FR/ES/IT 4.1
E94AYFLF004