RIUKOE Mini Gobo Moving head Light Mode D'emploi page 2

11、Channel mode: 9/11 two control channel mode.
12、Size: L * W * H = 280 * 210 * 260mm;
13、Weight: 3.4KG
Front Panel：
1, MENU: select program function
2: UP: Select the menu up
3, DOMN: Select the menu down
4, ENTER: confirm the selected function
Menu functions and function settings：
MENU Function setting description
Select DMX Address（1~512）: Press "ENTER" to enter, press "UP" and "DOWN" to select,
Addr
then press "ENTER" to confirm
Channel mode: The lamp has 9CH / 11CH two channel mode, press "ENTER" to enter, press
Chnd
"UP" or "DOWN" to select mode, press "ENTER" to confirm the selected mode.
Show mode: The unit has Sh 0 ~ Sh 4 five show modes, press ENTER to enter, press UP or
Shnd
DOWN to select mode, press ENTER key to confirm the selected mode.
Dimming mode: The unit has five dimming modes, press ENTER to enter, press UP or
dind
DOWN to select mode, press ENTER to confirm the selected mode
Slave selection mode: The unit has SL 1 ~ SL 2 two slave mode, press UP or DOWN to
SLnd
select, usually select SL 1, press ENTER key to confirm
Voice control selection: Press ENTER to enter, press UP or DOWN to select"on"or"OFF",
"on"to activate voice control, "OFF"to turn voice control off, press ENTER key to confirm
Soun
selection
Voice control sensitivity selection (0 ~ 100): Press ENTER to enter, press UP or DOWN to
SenS
modify the value to select sensitivity, press ENTER key to confirm
X-axis forward and reverse rotation selection: Press ENTER to enter, press UP or DOWN
Pint to select "on" or "yes", "on" is forward rotation, "yes" is reverse rotation, press ENTER to
confirm selection
Y axis forward and reverse rotation selection: press ENTER to enter, press UP or DOWN
tint to select "on" or "yes", "on" is forward rotation, "yes" is reverse rotation, press ENTER to
confirm selection
The display backlight is always on or off Select: Press ENTER to enter, press UP or
Led
DOWN to select, "on" is always on, "off" is off.
disp Display forward or inverted display selection: "disp" is the positive display, "dsip" is the
inverted display, press the ENTER key to select.
test Auto test: please User no set it
Light source surface temperature detection: Press the "ENTER" key to enter the system,
tenp
view the device light source surface temperature at this time.
Fixture Reset: press "ENTER" to Reset the fixture.
rSet
How to control the fixture:
1、DMX512 controller
Use the international standard DMX512 console, as shown below, with a signal cable to connect the
console and the light. Note: All connected lights must be set to the same channel (9CH or 11CH) mode;
otherwise, the lights will not be synchronized. After connecting the fixture and the console, turn on the
power to all devices, the fixtures begins to work and reset. After the fixture is reset, all the fixtures should
display one of the same address codes (1 to 512), indicating that the fixture has received a signal from the
DMX512 and the console can control the operation of the light.
2、 Master/slave operation
According to the scene needs, use the signal line to connect the lamp as shown the below ; all the lamps
must be set in the same channel mode (9CH / 11CH) ; otherwise, the equipment will be out of step; after the
lamps are connected, turn on the power of all the lamps , The fixtures will select one of the mainframes, the
mainframe will show as Sh 0, and the display screens of all the other slaves will be uniformly displayed as
SL 1 or SL 2. At this time, all the fixture will work synchronously with the mainframe.