More Settings; Changing Network Settings; Changing Caption Settings - Hisense Roku TV 50H4C Mode D'emploi

This section describes the features and settings of the TV that were not covered in the other parts of this manual.

Changing network settings

If needed, you can change your network settings at any time. For example, if you change the name of your wireless network (its
SSID) or its password, you will need to change your TV's settings so that it can continue to connect. Also, if you decided not to
connect to the Internet in Guided Setup on page
To change network settings, from the Home screen menu, navigate to Settings > Network, and then press [RIGHT]. At this
point, you can choose the following options:
Update connection – Press [OK] to start the update process. The TV uses your current wireless network name and
password to reconfirm the wireless connection, the local network connection, and the Internet connection.
Set up new wireless connection – Press [OK] to start a scan for wireless networks. The TV scans for the wireless
networks within range and displays the first few it finds in order, with the strongest signals first. In addition to your own
wireless signal, the TV might pick up signals from your neighbors. Now you can do one of the following:
• Select your network name – Select the name of your network and then enter your wireless password if requested.
• Scan again to see all networks – If you don't see your wireless network name in the list, select Scan again to see all
networks to list all networks in range. The first scan listed only the first few, strongest wireless signals. The second scan
sometimes results in a longer list. If you still don't see your network name, you might need to adjust the location of the
wireless router or the TV, turn on your router, or make other changes. When everything is ready, select Scan again to see
all networks to repeat the network scan.
• Private network – If your wireless network name is hidden, it won't appear in the list. Select Private network to display an
on-screen keyboard, and use it to enter your network name. Unless you changed the factory-set network name, you can
find the name (also called SSID) on a label the router.
• Tip: Wireless networks that are password-protected display a "padlock" icon adjacent to the name.

Changing caption settings

You can change many different settings that affect the appearance of captions.
To change caption settings, from the Home screen menu, navigate to Settings > Captions, and then press [RIGHT]. At this
point, you can choose the following options:
Captions mode – Choose Off, On, When mute, or Instant replay.
• If you choose On, the TV displays captions whenever they are available in the program information. This setting applies to
Antenna TV, the AV input, and streaming channels.
• If you choose When mute, the TV displays captions only when the sound is muted. This setting applies to Antenna TV, the
AV input, and streaming channels.
• If you choose Instant replay, the TV displays captions only during a replay operation; that is, after pressing [
back a few seconds in streaming video. This setting applies only to streaming channels when the program being streamed
supports instant replay.
This setting reflects the Closed captioning settings in the Options menu for certain TV inputs, as explained in
settings on page 25. Note that, once enabled, the captions mode remains set for all applicable inputs until you turn it off.
Tip: Some streaming channels require you to enable captions through a setting within their channel even though you have
turned on captions everywhere else.
Text style – Choose from a list of fonts. As you move the highlight to each font, you can see a sample of the result in an
adjacent panel.
Text edge effect – Choose from a list of edge effect styles, such as raised, depressed, and various shadows. As you move
the highlight to each effect, you can see a sample of the result in an adjacent panel.

More settings

6, you can use Network settings to connect at a later time.
36
] to jump
Options menu