Mellerware Fush! Manuel D'utilisation page 7

Cleaning
Disconnect the appliance from the
–
mains and allow it to cool before
undertaking any cleaning task.
Clean the equipment with a damp
–
cloth with a few drops of washing-
up liquid and then dry.
Do not use solvents, or products
–
with an acid or base pH such as
bleach, or abrasive products, for
cleaning the appliance.
Never submerge the appliance in
–
water or any other liquid or place it
under running water.
HOW TO DEAL WITH LIME SCALE
INCRUSTATIONS
For the appliance to work correctly
–
it should be kept free of limescale
or magnesium incrustations caused
by the use of hard water.
CLEANING THE BOILER
Check that the appliance is
–
cold (wait at least 3 hours after
disconnecting the appliance).
Do not force the safety cap to
–
open, make sure that the device is
completely depressurized before
opening it.
Fill the boiler and add the chosen
–
anti-scale product.
Let the product act following the
–
instructions for use.
Shake vigorously and
–
empty completely.
If necessary, repeat the operation.
Anomalies and repair
Take the appliance to an
authorised technical support
service if product is damaged
or other problems arise. Do not
attempt to disassemble or repair
the appliance yourself as this may
be dangerous.
For EU product versions
and/or in case that it
is requested in your
country:
ECOLOGY AND RECYCLABILITY OF
THE PRODUCT
The materials of which the
–
packaging of this appliance
consists are included in a
recycling system. Should you
wish to dispose of them, use the
appropriate public recycling bins
for each type of material.
The product does not contain
–
concentrations of substances that
could be considered harmful to the
environment.
- This symbol means that in
case you wish to dispose of
the product once its working
life has ended; take it to an
authorised waste agent for
the selective collection of
Waste from Electric and Electronic
Equipment (WEEE).
EN