Publicité
LINK LIGHT
The Link Light blinks the port LED on a switch or router to identify which port
the NetXpert 1400 is connected to.
• Connect the NetXpert 1400 to a cable that is plugged into an active hub, switch or
router.
• From the Link Test screen
• Press the Test button
test is running.
• The LED of the port you are connected to on a switch or router will blink at a slow
and consistent cadence for easy identification.
• To select the Link speed, touch the Left
connected at 10Mbps half or full duplex, 100 Mbps half or full duplex, 1Gbps half or
full duplex or auto.
, touch Link Light
.The Link Light graphic will begin to blink indicating that the
or Right arrows
.
. The Link Light can be
27
Publicité
