Vollrath BMA7103 Manuel De L'opérateur page 3

ASSEMBLY (CONTINUED)
4. Slide the side panel glass into the channel at the bottom and behind
the upright.
5. Insert and tighten the hardware to secure the panel behind the
upright.
6. Insert the hardware.
Outside: screw and metal washer
Inside: plastic washer and acorn nut
Bain Marie Heated Display Case Operator's Manual
7. Tighten the hardware to secure the front corner of the panel.
8. Repeat the steps to install the other glass panel.
Sliding Back Panels
1. Insert one back panel into the tracks. Slide it to the side.
2. Insert the other two glass panels.
3